yagi_antenna
This is an old revision of the document!
Parts Needed
- (2) 2x4x8'
- (~16) metal coat hangars
- Matching transformer (like this one for example)
- (2) small washers
Tools Needed
- miter saw to cut 2×4's to length
- strong wire cutters to cut metal coat hangars
- pliers to straighten wire cutters
- screwdriver and a few wood screws
- stapler and ~30 staples
- coax crimper and wire end
- small piece of sandpaper
yagi_antenna.1530972185.txt.gz · Last modified: by josh