Differences

This shows you the differences between two versions of the page.

--- projects:dwss [2011/02/09 16:11] – external edit 127.0.0.1
+++ projects:dwss [2019/10/12 17:50] (current) – document both dwscr and dwss josh
@@ Line 1: / Line 1: @@
-====== DornerWorks ScreenSaver (dwss) ======
+====== DornerWorks ScreenSaver ======
+There are two versions of the screensaver: dwscr and dwss. dwscr was originally a Windows version, but it runs on Linux as well. It has more modes and was what I ran when I was using Windows. It works as a Windows screensaver, and it runs as a Linux application, but isn't integrated with any Linux screensaver framework to actually be a Linux screensaver. dwss is a separate version which works as a Gnome screensaver on Linux. It has different modes.
+===== dwscr (original version) =====
+This screensaver uses SDL and ODE. There are various modes.
+==== Code ====
+<code bash>
+git clone --recursive git://holtrop.mooo.com/dwscr.git
+</code>
+==== Dependencies ====
+<code bash>
+sudo apt install ruby libode-dev libsdl1.2-dev
+</code>
+==== Build ====
+<code bash>
+make
+</code>
+==== Install ====
+<code bash>
+make install
+</code>
+==== Running ====
+<code bash>
+./dwscr -w 1600 -h 1200
+</code>
+Pressing "N" will switch to the next mode. Any other key will terminate the program.
+===== dwss (gnome-only version) =====
 This project implements a DornerWorks-themed screensaver for use in the gnome-screensaver architecture, which is used by Ubuntu Linux.
-===== Code =====
+==== Code ====
 <code bash>
-git clone git://holtrop.homelinux.com/dwss.git
+git clone --recursive git://holtrop.mooo.com/dwss.git
 </code>
-===== Dependencies =====
+==== Dependencies ====
 <code bash>
-sudo apt-get install scons libgtkglext1-dev
+sudo apt install scons libgtkglext1-dev
 </code>
-===== Build =====
+==== Build ====
 <code bash>
@@ Line 21: / Line 61: @@
 </code>
-===== Install =====
+==== Install ====
 <code bash>